Drawing Die Pallet :-
Drawing dies is being referred to an process wherein the bigger diameter tubes , wire and coils are reduced to smaller required size diameteres of tubes , wire and coils while using tungsten carbide as base raw mateiral to reduce the sizes. Metal is being pulled through the smaller diameter of drawing dies pallets. Drawing dies pallets are avaialble in different shapes like round , square , octagonal and other special shapes. We manufacture drawing dies as per customized shape as per customer requirement . Industries being served from drawn products includes aeronautical , automobile ,electronics etc. Drawing die is a very essential component for all types of wire manufacturers like all types of metal wire and electrode wire. Drawing dies find it applications in drawing bars , rods , pipe , tubes , coils and all types of liner products which require to be drawn. Material which can be drawn from our pallets includes steel, copper, molybdenum, brass and alloy material. Taking into consideration that Drawing dies costs around 1/2 of drawing we have developed some cost per product effective grades which are lesser on cost while also offering maximum toollife.Some of our common drawing grades are as below.
Grade | Density | Hardness | Hardness | TRS | Compression strength | KIC |
(g/cm³) | (HRA) | (HV) | MPA | GPA | MPA.m1/2 | |
TC10 | 14.4 | 92 | 1865 | 3600 | 5.9 | 14 |
TCG2 | 14.93 | 90.2 | 1586 | 3200 | 4.1 | 17 |
TCG3 | 14.61 | 89.3 | 1447 | 3300 | 4 | 18 |
TCG4 | 14.31 | 89.2 | 1431 | 3400 | 3.9 | 19 |
Application drawing die as below :
1. TC10 suggested for manufacturing precision dies like dies for smaller diameter wire and rods less than diameter 20mm.
2. TCG2 suggested for manufacturing precision dies like for Diameter 20mm rods or wire drawing , also for drawing tubes of diameter smaller than 10mm
3. TCG3 suggested for manufacturing precision dies like for drawing steel , non-ferrous metal and alloy whose diameter less than 50mm , also for drawing tubes of diameter smaller than 35mm.
4. TCG4 suggested for manufacturing precision dies like for drawing steel bars and copper pipes which are subject to high stresses.
![]() |
PARIN ENGINEERS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd.(Terms of Use) Developed and Managed by Infocom Network Ltd. |